|
The Pansat 9000 HD is the new High Definition FTA Satellite Receiver from Pansat.
Coming Soon. At last the long awaited 7000HD from Pansat is almost here. Full support for standard definition ( MPEG2 ) and High Definition (MPEG4) Free To Air satellite signals.
"Finally a true HD FTA satellite TV receiver "
|
Pansat 7000 HD Features
- View Standard Definition/High Definition contents (MPEG2 and support MPEG4 AVC/H.264)
- Fully Digital HDMI ( SD/HDTV formats)
- Full Compliant of MPEG-S &DVB-S2 Digital & DVB broadcasting
- 2 Common Interface
- Front USB connection
- Card Reader embedded
- 950-2150 MHz input Frequency (IF Loop Throughout)
- Satellite Scan - Simultaneous Scan with 4 Satellites
- Flexible receiption of SCPC & MCPC from C/Ku-Band Satellites
- Variable Input Symbol Rate (1-45 Msps)
- Video output resolution: 480p,720p,1080i
- User selectable output resolution
- EPG (Electronic Program Guide)
- Multi language OSD
- Automatic PAL/NTSC Conversion
- Fast Channel Change
- 5000 Channels TV & Radio program
- Timer Function (Automatic Turn On/ Off by Setting Function)
- Conditional Access
- RTC (Real Time Clock)
- PIP , PIG (Picture In Graphic)
- 5 Favorite List & Unlimited Programs per each
- Powerful Channel Editing Fuction
Sorting: Alphabetic, Satellite, FTA/Scramble, Parental Lock
Move, Delete, Favorite Edit
Parental Lock, Channel Rename, Channel Skip
- Manual PID/ Satellite & TP/ Network Scan
- S/PDIF (Digital Audio or Dolby AC3 Stream out)
- 1 optical digital output for Dolby Digital and PCM digital audio
- Diseqc 1.2 and USALS Compatiable
- Comparable of Setting the Frequency for SMATV System
- SD Memory card compatible(JPEG,MP3,firmware download)
- Software Upgrade via RS-232C (Receiver to Receiver, PC to Receiver)
- Component Out (YPbPr)
- Universal Remote
- OTA
Pansat HD Specs
Front-End
1 Input Connector F-type, IEC 169-24
IF Input Frequency 950MHz to 2150MHz
IF Loop Throughout 950MHz to 2150MHz
Input Level -65 dBm~-25 dBm
LNB Power 13 /18VDC / 500mA Max
DiSEQqC Control Diseq1.2 & USALS compatible
Band Switch 22KHz Tone
Modulation method LDPC/BCH(DVB-S2) 8PSK/QPSK, DVB-S QPSK
Symbol Rate LDPC/BCH(DVB-S2) 8PSK/QPSK :10~30Msps / DVB-S QPSK: 1~45Msps
Viterbi Decoding Rate 1/2,2/3,3/4,5/6 and 7/8
Reed Solomon Decoding FEC: 204, 188. t=8
LDPC/BCH Punctured Code ,1/2,2/3,3/4,3/5,4/5,5/6,8/9,9/10 in DVB-S2
MPEG transport Stream A/V Decoding
Demultiplex According to ISO/IEC 13818-1
Input syream Max. 90Mbit/s
Aspect Ratio 4:3, 16:9
Video Resolution 1920 x 1080
Audio Decoding MPEG Layer l & ll , MPEG-4 AAC+
Audio Mode Single Channel /Dual Channel, Stereo, Joint Stereo
Audio Sampling Frequency up to 192KHz
Microprocessor & Memories
Main Processor Trinity(ARM926)
CPU Clock 280MIPS
Flash Memory 8 Mbyte
SDRAM 160 Mbyte
EEPROM 32 Kbit
Data port
Connector 9 Pin D-Sub Type
Protocol RS232 Asynchronous
Data Rate Max. 19.2Kbps
RF Modulator
Connector IEC 169-24, Male/ Female
Frequency 470-860MHz (UHF)
Output Channel CH 21-69
TV Standard PAL-B/G,D/K, I,M Selectable
Front Panel
4 Digits LED Channel Number Display
8 keys Power,Channel Down/Up, Volume up/down,Menu,Exit,OK
VFD VFD Display
Rear Panel
IF Input F-type Connector
IF Loopthrough output F-type Connector
6 Phone (Cinch) Video, Audio L, Audio R, YPbPr
Scart TV / VCR <---- This we won't get
S/PDIF Optical
HDMI Type A
S-VHS 4-pin Mini- Din
Modulator F-type
RS232 Serial Port 9 Pin D-Sub Type
Electrical and Mechanical
Input Voltage AC 90-250V, 50/60Hz
Power Consumption Max. 45 Watts
Standby Power Less than 10 Watts
Size(WxHxD) 340x245x65mm
The Pansat 9000HD is the new High Definition FTA Satellite Receiver from Pansat. |
|
|
