|
|
The Fortec receivers are now made in a different factory and are not the same
as the old ones that we all knew and loved.
If you would like a FTA receiver that is made in the same factory as the old Fortec Ultra
you will love the SatPros DSR 500
EPG (Electronic Program Guide) - 7 days of program information
Fully compliant with MPEG-2 Digital & DVB broadcasting
950~2150 MHz input Frequency (IF loop throughput)
Variable input Symbol Rate (1.5~45 Msps)
Multi-language OSD (On-screen Display)
Automatic PAL/NTSC Conversion
Fast Channel Change
Flexible reception of SCPC & MCPA from C/Ku band Satellites
Timer Function (Automatic On/Off Setting Function)
256-Colors (Graphic Use Interface)
P-I-G (Picture-in-Graphic) On-screen Display
Powerful Channel Editing Function:
-Sorting: Alphabetic, Satellite, FTA/Scramble, Parental Lock, TP Order
-Move, Delete, Edit Favorites
-Parental Lock, Channel Rename, Channel Skip
Manual PID/Satellite & TP/Network Scan
Simultaneous Scan of 4 Satellites
USALS Compatible
Capable Of Setting the Frequency for SMATV Systems
Upgrade through RS-232C (STB to STB, PC to STB)
|
![]() |
DIGITAL TUNER & DEMODULATOR |
Input Connector |
F-type, IEC169-24, Female |
Input Frequency Range |
950 MHz to 2150 MHz |
Loop Throughput |
950 MHz to 2150 MHz |
Input Impedance |
75 ohm |
Signal Level |
-25 to -65dBm |
LNB Power |
13/18 V DC, 500mA Max. |
22 KHz Tone |
Frequency: 22 ± 2 KHz Amplitude: 0.6 ± 0.2
V |
DiSEqC Control |
Version 1.0 & 1.2 |
Demodulation |
QPSK |
Input Symbol Rate |
2-45 Ms/s, SCPC/MCPC |
FEC Decoder |
Convolution Code Rate 1/2, 2/3, 3/4, 5/6, and 7/8 |
DiSEqC |
USALS Compatible |
SYSTEM MEMORY
|
Main Processor |
Sti 5518ST20 32 bit |
CPU Clock |
81MHz |
Flash Memory |
1 Mbytes |
SDRAM |
8 Mbytes |
EEPROM |
32 Kbytes |
Channel memory |
Digital channels: 3,000 |
Multi-Language Menu
(Varies by Region) |
English / Spanish / French / German / Portuguese / Russian /
Arabic / Turkish |
Remote Control |
IR remote control (carrier Freq: 38 KHz) |
MPEG TRANSPORT STREAM & A/V DECODING |
Transport stream |
MPEG-2 ISO/IEC 13818 Transport Stream Specification |
Profile Level |
MPEG-2 MP@ML |
Input Stream |
Max. 90Mbits/s |
Aspect Ratio |
4:3, 16:9 |
Frame Rate |
25 Hz for PAL, 30 Hz for NTSC |
Video Resolution |
720 x 576(PAL) 720 x 480(NTSC) |
Teletext |
Through VBI / OSD |
Audio Decoding |
MPEG Layer I & II |
Audio Mode |
Single channel / Dual channel / Joint stereo / Stereo |
Sampling Rate |
16, 22.05, 24, 32, 44.1, and 48 KHz |
A/V & DATA IN/OUT |
RCA Output |
Video, Audio L/R, 0/12V or S/PDIF on N.A. model |
IF Input |
F-type Connector |
Loop-through Output |
F-type Connector |
TV SCART (If avail.) |
CVBS, L, R Output with volume control |
VCR SCART (If avail.) |
RGB, CVBS, L, R |
Data Interface |
RS-232, Connector: 9-pin D-sub type |
RF MODULATOR
|
RF-Connector |
75ohm IEC169-2, Male/Female |
Frequency |
470MHz to 860MHz |
Output Channel |
CH 21-69 or Ch 3-4 |
TV Standard |
PAL D/K/I/M, NTSC |
Preset Channel |
Ch 3, or CH 38 Software changeable by Menu screen |
POWER SUPPLY |
Input Voltage |
AC 90 to 250 VAC (SMPS), 50Hz/60Hz |
Power Consumption |
Max 25W |
Stand-by Power |
< 5 Watts |
Protection |
Separate internal fuse |
PHYSICAL SPECIFICATIONS |
Size (W x H x D) |
290 x 200 x 65 mm |
Weight |
2.3 Kg |
ENVIRONMENTAL CONDITIONS |
Operating temperature |
0 ~ 40 C |
Storage temperature |
-10 C ~ + 80 C |
Operating humidity range |
10 ~ 85% RH, Non-condensing |
Storage humidity range |
5 ~ 90% RH, Non-condensing |
|
The Fortec receivers are now made in a different factory and are not the same
as the old ones that we all knew and loved.
If you would like a FTA receiver that is made in the same factory as the old Fortec Ultra
you will love the SatPros DSR 500
|
| |
|
|
